DES-1016R+ - D-Link DES-1016R+ 16 Port 10/100Mbps Rack Mount Switch

IEEE 802.3x Flow Control allows your servers to directly connect to this switch for fast, reliable data transfer. At 200Mbps full duplex, this switch provides high-speed data pipes to your servers with minimum data transfer loss. Auto-negotiation of MDI/MDIX cross over eliminates the need for cross over cables or uplink ports. Any port can simply plug to a server, workstation, or hub using the usual straight through twisted-pair cable.
16 10/100Mbps Ports; Unmanaged Stand-alone - Layer 2 Switch, For Workgroups. Each switch provides 16 10/100Mbps ports to connect to 16 or 24 workstations and servers. Hubs can also connect to this switch. All ports auto-sense the network speed of the computers and hubs to run at either 10Mbps or 100Mbps. All ports auto-negotiate between full and half duplex, flow control, and MDI/MDIX twisted-pair cross over. Each switch provides an open slot for you to install 2 optional Fast Ethernet fibre ports to attach to 2 servers or cascading switches over the 2 km long reliable fibre cables. Expansion is easy through any twisted-pair port. You cascade several switches together through this port to get more ports.

Memory
Memory (Maximum)	2.0 MB ( )
Performance
MAC Addresses	8,000
Shipping
Shipping Pallet Dimensions	(W) x (D) x (H) - Weight
Shipping Carton	containing a total of
Shipping Carton Dimensions	(W) x (D) x (H) - Weight
Performance
Topology	Star
Shipping
Trade Carton	containing a total of
Trade Carton Dimensions	(W) x (D) x (H) - Weight
Interfaces/Ports
Network Speeds Supported	10/100/1000 MBps
Full Duplex Capabilities	Half or Full
Power over Ethernet (PoE)	,
Fixed Ports	16 port(s) x , 10/100/1000 Mbps , ( 16 x 10/100/1000 autosensing ports, RJ-45 )
Uplink Ports	x , , ( )
Dual Personality Ports	x , , ( )
Network Slots	x , ( )
Module Slots (Available)	1
System
Ethernet Switching Features	IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, ANSI/IEEE 802.3 NWay auto-negotiation
System Requirements
System Requirements	FCC Class A, CE Mark, VCCI Class A, C-Tick, BSMI Class A, UL, CSA, TUV/GS
Electrical
Voltage/Power/Frequency	100 to 240 VAC / 10 W / 50 to 60 Hz
Power Adaptor Type	Internal
Environmental
Environmental	Operating Temperature 0 to 40 °C - Humidity 5 to 90 %
Physical
Form Factor	Desktop Unit
Case Colour	Black / Metalic Grey
LED Status Indicators	Link Status and Link Activity, Power and Speed
Dimensions	28.0 cm (W) x 18.0 cm (D) x 4.4 cm (H) - Weight 2.8 kg
Shipping
Shipping Pallet	containing a total of

• 16 10/100Mbps ports

• 1 Expansion slot for 2 optional 100Mbps fiber ports

• Full/half duplex support for each port

• Auto-learning of network configuration

• Flow control in full duplex mode for protection against data loss

• Back pressure in half duplex mode

• Auto MDI/MDIX cross over function for each port

• RAM buffer dynamically allocated for each port