KHX6400D2/2G - Kingston HyperX 1GB (1x1GB) Memory Module 800MHz PC2-6400 DDR2 Unbuffered Non-ECC CL5 240-pin DIMM

KHX:DDR2 - It's Here - HyperX DDR2 memory, the next-generation evolution of DDR memory technology. Like all Kingston HyperX products, HyperX DDR2 modules were specifically engineered and designed to meet the rigorous requirements of PC enthusiasts. HyperX DDR2 offers faster speeds, lower latencies, higher data bandwidths and lower power consumption. HyperX is available in single and dual channel memory kits. Second-generation DDR memory technology. DDR2 memory modules are not backward-compatible with DDR due to lower voltage, different pin configurations and incompatible memory chip technology.
Kingston's 256M x 64-bit 2GB (2048MB) DDR2-800 CL5 SDRAM (Synchronous DRAM) memory module, based on sixteen 128M x 8-bit DDR2 FBGA components. This module has been tested to run at DDR2 800MHz at latency timing of 5-5-5-15 at 1.85V. The SPD is programmed to JEDEC standard latency 667Mhz timing of 5-5-5-15 at 1.8V. This 240-pin DIMM uses gold contact fingers and requires +1.8V.

Memory
Memory Size	2048 MB ( 1 module(s) x 2048 MB )
Memory Type	DDR2
Memory Speed	800 MHz
Memory Package	DIMM
Designation	PC2-6400
Pin Configuration	240 pins
Data Width	64 bit
Bus I/O Configuration	Unbuffered
Error Correction	Non ECC
CAS Latency	CL5
Memory Latency	5-5-5-15
Connector Material	Gold
Module Configuration	256M x 64
Electrical
Voltage	2.0 V
Physical
Form Factor	240-Pin DIMM Module
Dimensions	(W) x (D) x (H)

• Power supply : Vdd: 1.8V ± 0.1V, Vddq: 1.8V ± 0.1V

• Double-data-rate architecture; two data transfers per clock cycle

• Bidirectional data strobe(DQS)

• Differential clock inputs(CK and CK)

• DLL aligns DQ and DQS transition with CK transition

• Programmable Read latency 5 (clock)

• Burst Length: 4, 8 (Interleave/nibble sequential)

• Programmable Burst type (sequential & interleave)

• Timing Reference: 5-5-5-15 at +1.8V / 5-5-5-15 at +1.85V

• Edge aligned data output, centre aligned data input

• Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh)

• Serial presence detect with EEPROM

• High Performance Heat Spreader

• PCB : Height 1.180' (30.00mm), double sided component

Lifetime