KVR533D2N4/2G - Kingston ValueRAM 2GB 533MHz DDR2 Non-ECC CL4 DIMM

Please check that this memory is suitable for your system, before buying. You can match your system with the Kingston Memory Product finder at www.kingston.com.
Kingston ValueRAM delivers the same reputable, high-quality, Kingston memory modules you've known for years at competitive prices for the white box market. Kingston ValueRAM offers a broad line of modules for customers seeking the best cost/value memory.

Memory
Memory Size	2048 MB ( 1 module(s) x 2048 MB )
Memory Type	DDR2
Memory Speed	533 MHz
Memory Package	DIMM
Pin Configuration	240 pins
Data Width	64 bit
Bus I/O Configuration	Unbuffered
Error Correction	Non ECC
CAS Latency	CL4
Electrical
Voltage	1.8 V
Physical
Form Factor	DIMM Module
Dimensions	(W) x (D) x (H)

• JEDEC standard 1.5V ± 0.075V Power Supply

• VDDQ = 1.5V ± 0.075V

• 667MHz fCK for 1333Mb/sec/pin

• 8 independent internal bank

• Programmable CAS Latency: 5,6,7,8,9,10

• Posted CAS

• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock

• Programmable CAS Write Latency(CWL) = 7(DDR3-1333)

• 8-bit pre-fetch

• Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]

• Bi-directional Differential Data Strobe

• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)

• On Die Termination using ODT pin

• Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE . 95°C

• Asynchronous Reset

• PCB : Height 1.180' (30.00mm), double sided component

Lifetime