S352U2RER - StarTech 3.5 inch eSATA USB Dual Removable SATA RAID External Hard Drive Enclosure

The hot-swappable trays allow you to quickly remove and install hard drives without having to reboot or disconnect the drive enclosure. Plus, the dual SATA hard drive enclosure offers built-in RAID support, which will rebuild the RAID array in the event a new drive is inserted - providing seamless uninterrupted communication with your PC and data. The eSATA USB Dual SATA HDD Enclosure features a sturdy and attractive silver aluminum casing that looks great in any environment and helps protect installed SATA hard drives and their valuable data content from in-transit damage, while providing maximum heat dissipation.
This eSATA/USB External Dual SATA Hot-swap Hard Drive Enclosure lets you install two 3.5in SATA (SATA, SATA II) drives, each at a capacity of 2 TB (for a total max capacity of 4TB), with support for a broad range of RAID applications including RAID 0, RAID 1, BIG, JBOD, SAFE33 & SAFE50. Delivering maximum versatility, the Dual SATA External Hard Drive Enclosure can be connected to a computer using either eSATA or USB 2.0, and features built-in port multiplier support that allows both of the installed SATA hard drives to be connected using a single eSATA connection to your computer (if using an eSATA connection).

Interfaces/Ports
USB Ports	1 x USB 2.0
eSATA	1 x eSATA
Electrical
Voltage/Power/Frequency	115 to 230 VAC /
Environmental
Environmental	Operating Temperature - Humidity
Physical
Form Factor	Enclosure
LED Status Indicators	Drive A: 1 x Link, 1 x Activity • Drive B: 1 x Link, 1 x Activity • USB: 1 x Link, 1 x Activity • eSATA: 1 x Link, 1 x Activity
Case Colour	Silver
Dimensions	10.0 cm (W) x 23.3 cm (D) x 14.0 cm (H) - Weight 2.0 kg

• Back panel Power and Fan ON/OFF switches

• Blue LEDs display power plus HD 1 and HD 2 activity

• Built in 50mm fan to ensure all your hard drives are kept cool

• eSATA supports plug and play with RAID and port multiplier supported cards

• GUI and DIP switch configuration supported

• Hot-swappable trays

• Raid can be used with both eSATA or USB 2.0 connection, both hardware and software controlled

• Supports a maximum hard drive size of 2.0 TB, for a total of 4TB (Note: Some 32bit operating system will only support a maximum combined size of 2TB while in RAID 0)

• Supports RAID 0 (Striping or Fast), RAID 1 (Mirroring or Safe), BIG (Spanning or Concatenation), SAFE33 (33% is RAID 1) and SAFE50 (50% RAID 1), and JBOD (Just a bunch of disks or separate disks)

• Supports two SATA I/II 3.5 Hard Drives

• System reset/soft reset button

• Transfer speeds up to 3Gbps with SATA II and 480Mbps with USB 2.0

1 Year Warranty