SATSASBAY3BK - StarTech Hot Swap SATA/SAS Backplane RAID Bays 3 Hard Drive Mobile Rack

Aluminum construction with an 80mm cooling fan ensures optimal heat dissipation for all of the drives. Built-in audible warnings and LED status indicators keep you aware of the status of the drives at all time. Add additional hot-swap bays to a server or workstation computer. Replace or upgrade old IDE or SATA backplanes with a SAS/SATA backplane. Backup systems where physically removing the backed up data from the system is required. Be able to replace/remove individual drives from a storage array with minimal or no system down time.
The SATSASBAY3BK SAS/SATA Backplane offers an easy-to-use and cost-effective SATA hot swap solution and features a sturdy and compact 3-in-2 design that lets you install up to three 2.5/3.5 SATA or SAS hard drives into only two 5.25in bays. With support for SATA/SAS HDD speeds up to 6.0 Gbps, the mobile rack/backplane is fully compatible with RAID installations to ensure maximum performance and versatility for enhanced storage applications. Full support for both SAS and SATA drives enables the right type of drive for any application to be used.

Hard Disk
Drive Interface	SATA
Disk Size	2.5 Inches
Disk Capacity	500 GB
Disk Speed	5400 RPM
Data Buffer/RAM	8 MB
External Data Transfer
USB 2.0 Cable	60 MB/s
USB 3.0 Cable	625 MB/s
External Interfaces/Ports
USB Ports	1 x USB 3.0
Shipping
Shipping Carton Dimensions	(W) x (D) x (H) - Weight
Trade Carton	containing a total of
Trade Carton Dimensions	(W) x (D) x (H) - Weight
Shipping Pallet	containing a total of
Shipping Pallet Dimensions	(W) x (D) x (H) - Weight
System
Software Included	Includes StoreJet Elite backup and security software
Plug and Play	Supported
System Requirements
System Requirements	Desktop or notebook computer with a working USB port
Operating Systems Supported	Windows XP, Vista, 7 • Mac OS X 10.4 or later (only USB 2.0 currently supported) • Linux Kernel 2.6.31 or later
Compliance
Certifications	CE, FCC, BSMI
Electrical
Voltage/Power/Frequency	/ /
Environmental
Operating Temperature	5 to 55 °C
Non Operating Temperature	-20 to 60 °C
Relative Humidity	8 to 90 %
Physical
Form Factor	2.5 inch Hard Drive
Enclosure type	Portable
Colour	Black
In The Box	StoreJet 25M3 Hard Drive, Quick Start Guide, Warranty Card, USB 3.0 Cable, USB Power Cable
Dimensions	8.24 cm (W) x 2.04 cm (D) x 12.63 cm (H) - Weight 0.206 kg
Shipping
Shipping Carton	containing a total of

• Fully supports SAS revision 1/2 (3.0/6.0 Gbps) hard drives and controllers

• Fully supports SATA revision 1/2/3 (1.5/3.0/6.0 Gbps) hard drives and controllers

• Supports 2.5 and 3.5 form factor SAS or SATA hard drives

• Easy to use and lockable removable drive trays

• Audible temperature warning buzzer for 55°C, 60°C, or 65°C

• Flammability rating of UL 94 V-0

• Independent power switches for each drive

• LED status indicators for each drive

• Sturdy aluminum and steel construction

• 80mm rear mounted, ball-bearing cooling fan

• High/Low fan speed controls

• Fan sensor reset switch

• Plug-and-Play and Hot-Swap compatible

2 Years