PLATEIDE2CF - StarTech IDE to CF Adaptor Card with a PCI Bracket Card reader (CF I, CF II, Microdrive) IDE

PLATEIDE2CF is powered by a 4 pin floppy connector or 44 pin IDE port, and supports jumper settings for Master and Slave modes.
This Compact Flash to IDE Adaptor connects to any standard 40 pin or 44 pin IDE connection on a desktop computer, allowing a Compact Flash card to be used as bootable storage in place of an IDE hard drive!A Do-it-yourself SSD solution, the CF to IDE Adaptor can be powered by a 4-pin floppy connector or through a 44-pin IDE port, and can be mounted to the computer rear panel using the included PCI bracket - allowing Compact Flash, Compact Flash 2, or IBM MicroDrive media to be inserted into the CF slot. The Adaptor function is completely transparent to the operating system, and jumper settings are provided allowing you to designate the installed MicroDrive or CF cards to act as a Master or Slave drive.

Memory
Memory (Maximum)	( )
Environmental
Environmental	Operating Temperature - Humidity
Physical
Form Factor	Plug In Card
Dimensions	4.5 cm (W) x 21.8 cm (D) x 15.8 cm (H) - 0.06 kg

• PCI Mounting Bracket

• Push bottom ejector on board

• Supports jumper for master and slave setting

• Supports 40 pin & 44 pin IDE standard Port both

• Powered by 4 pin floppy connector or 44 pin IDE Port

• Support CompactFlash cards (Type I & II) or a IBM Microdrive

• Transparent to the operating system and does not require any drivers

• The CF card can be the primary bootable device containing the OS and application

• For any computer case, mini computer, embedded system, iPC and Rackmount case

• Lightweight, convenient to carry

Lifetime Warranty